🏜️ Kove factory-standard suspension helper

Kove rally and adventure starting setup calculator.

Uses Kove factory standard settings as an estimated 75kg solo-rider baseline. Enter your load to estimate a firmer or softer starting point. Final setup must be confirmed by sag measurement and safe test ride.

🏠 Back to Moto Tools

1) Enter your setup

kg only

Motorcycle model

Seat / version

Rider weight kg

Pillion weight kg

Luggage / box kg

Count directionTurn fully clockwise gently first = hard / closed / 0. Then turn anticlockwise and count out. Do not force the adjuster after it stops.

Calculation75kg is treated as factory-standard base. Heavier load gives firmer damping estimate and more preload guidance.

Fine tuneIf bouncy, add rebound damping. If harsh, reduce compression. If rear sits low, add preload.

2) Recommended starting point

75kg base

Total load

75 kg

Kove • Solo

Count directionFully clockwise hard/0 → anticlockwise count-out to listed value.

Rear shock Main

Preload by spring length/adjuster. Damping counts out from fully clockwise hard.

Preload-

High-speed comp.-

Low-speed comp.-

Compression-

Rebound-

Front fork Auxiliary

Front damping counts out from fully clockwise hard. Adjust both fork legs equally.

Preload-

Compression-

Rebound-

Factory-standard starting point. Confirm by sag and test ride.

Important note: Kove manuals do not clearly state exact 75kg rider weight for every model. This calculator uses the factory standard suspension setting as the estimated 75kg starting point. The result is a starting point only, not a replacement for sag measurement, owner manual procedure or professional suspension setup.

Disclaimer: Kove damping settings on this page are counted from fully clockwise hard/closed, then anticlockwise out to the listed value. Do not force any adjuster after it stops. Preload settings without an exact factory number are shown as guidance only and should be confirmed by sag measurement. Always test ride safely and consult the owner manual, dealer or suspension technician if unsure.

Copyright & DMCA: All content © 2026 MFZstudio. All rights reserved. Unauthorized reproduction or use without written permission is prohibited. DMCA takedown: contact www.mfzstudio.com with work ID, material location, contact info & perjury statement. Valid notices addressed promptly.